Description

• Polar diagram: supercardioid
• Unidirectional directivity
• 1/2 condenser capsule
• Allows broadcast-quality recordings
• Frequency response: 4020000 kHz
• Sensitivity: 20 mV
• Self-noise: 14 dBA
• SPL: 134 dB
• Lightweight and compact plastic case
• Rycote Lyre shock-absorbing systemintegrated mounting
• Mounting on camera with the integrated hot shoe adapter
• 3/8 tripod or pole base
• Connection cable with 3.5 mm TRS jack plug (Dual mono)
• Switchable pre-attenuation (-10 dB)
• Switchable boost level (+20 dB) for quiet sound sources
• Switchable high-pass filter (80 Hz) to eliminate low-frequency noise
• Powered by a 9V battery (not included)
• On/off switch with LED battery status
• Over 70 hours of operation with a new, high-quality battery
• Length: 150 mm
• Weight: 85 g (without battery)
• Attached foam windscreen

Detailed control

Adjustable high-pass filter (0, 80Hz).
3-position level selector (-10dB, 0dB, +20dB)
. Power indicator.
Camera shoe mounting pad and 3/8″ thread for easy pole mounting.

Impeccable sound quality.
Powered by a 9V alkaline batteryover 70 hours of use.
Ultra-quiet circuitry.
Flexible, lightweight cable to minimize handling noise and ensure isolation.
Designed and manufactured in Australia.
10-year warranty on registered microphones

Microphones like the VideoMic Pro have a narrower pickup pattern (a narrower angle of capture) and are therefore suitable for recording
sound during news reports, weddings, or sporting events. Use the VideoMic Pro when you want to capture signals
directly in front of the microphone but not sounds coming from behind or to the sides.

Camera Installation:
The VideoMic Pro has a standard camera shoe pad under the suspension cradle. Designed to reduce
motor and handling noise transmitted from the camera to the microphone, the shoe pad also has a 3/8″ thread for tripod or boom pole mounting.
Older or entry-level cameras may generate mechanical noise that the VideoMic Pro might pick up.
Consider enabling the high-pass filter to reduce hum and other low-frequency noise.
Loosen the locking knob (counterclockwise) before inserting the pad into the camera’s shoe. Turn the knob clockwise
to secure the VideoMic Pro to the camera.